Wellesley, MA

Wellesley Tile & Stone Cleaning and Sealing — Marble Baths, Large Kitchens, And Original Tile

Wellesley homes often combine ceramic and porcelain with natural stone — marble baths, travertine entries, slate mudrooms. Each needs its own cleaner and its own sealer. We clean and seal tile and stone with the process that’s safe for the material, and we always look at stone in person before pricing it.

★★★★★ 350+ 5-Star Google Reviews
200°F Truck-Mount Extraction
Clear or Epoxy Color Sealer
Family-Owned Since 2004
Free Estimates
What’s Actually In The Grout

What Builds Up In Grout, Room By Room.

Ceramic and porcelain resist staining; the grout around them doesn't. It is porous enough to hold on to nearly anything that touches it. Most discoloration traces back to one of these four sources.

BATH
Source 1
Soap Scum & Hard Water
Soap meets the calcium and magnesium in hard water and turns into a chalky film. On ceramic tile the film collects in the grout; on marble it dulls the stone as well. Layer by layer it holds more soil until the lines look gray.
How We Get It OutOn ceramic and porcelain, an alkaline pre-treatment dissolves the film before hot-water extraction lifts it out. Marble gets a pH-neutral cleaner and lower pressure.
KITCHEN
Source 2
Cooking Oil & Food Residue
A large kitchen still has one path that gets all the traffic. A little oil settles there with every meal cooked, the grout absorbs it, and soil bonds to it. The lines along that path darken while the rest of the room stays light, and mopping doesn't reverse it.
How We Get It OutA degreasing pre-treatment dissolves the oil; hot-water extraction removes it and the bonded soil. Stone floors are cleaned with pH-neutral products instead.
ENTRY
Source 3
Tracked-In Soil & Winter Salt
Slate and tile entries collect grit, sand and winter road salt from every shoe. Grit dulls a glazed or honed surface the way sandpaper would, and salt slowly eats at grout. An entry can look worn years ahead of the rooms behind it.
How We Get It OutWe rinse to neutralize salt, extract the embedded soil, and seal: grout sealer for tile, a stone-specific sealer for slate or travertine.
SHOWER
Source 4
Mildew & Bacteria
Shower grout that stays damp will grow mildew, in a new marble bath as readily as an old tiled one. Bleach is no answer on stone and only a surface fix on ceramic; the growth sits deeper in the pores and returns. Look for black lines and a musty smell.
How We Get It OutA stone-safe or tile-safe antimicrobial pre-treatment dwells in the grout, hot extraction rinses it out, and the right sealer goes on to resist regrowth.
!
Why Grout Is The Weak Point
Tile Is Sealed. Grout Is A Sponge.
Glazed ceramic and porcelain absorb almost nothing, which is why they mop clean. Grout is porous and sits below the surface, so it gathers whatever is walked on or spilled. Natural stone is porous too, which is why it gets a sealer of its own.
Two Cleaning Service Options

Cleaning With Clear Sealer, Or Cleaning With Epoxy Color Sealing.

Each floor is cleaned first and sealed second, on the same visit. On ceramic and porcelain that means one of the two options below; natural stone gets a sealer made for stone.

Service 1

Cleaning With Clear Sealer

Lasts 1–3 Years

For ceramic and porcelain floors whose grout still cleans up evenly. Nothing about the look changes; the grout simply returns to its original tone and gets a penetrating sealer to hold it there.

  • Deep clean at 200°F with truck-mount extraction
  • Pre-treat traffic patterns and stains
  • Powerful suction lifts everything out
  • Penetrating clear sealer applied
  • Grout color stays its original tone
  • Plan to re-clean and re-seal every 1–3 years
How Long It Actually Lasts
From one year to three. How much the room is used matters most. What you clean with matters next: acids like vinegar and citrus break the sealer down, while a neutral cleaner is gentle on it.
Tile and grout cleaning process
How We Clean It

The Six-Step Tile & Grout Process.

Ceramic and porcelain floors in Wellesley go through the six steps below. Marble, travertine and slate follow the same order with lower pressure and pH-neutral products.

  1. 1
    Inspect & Test
    We identify the material, ceramic, porcelain or stone, and test the grout before choosing products.
  2. 2
    Pre-Treat
    Ceramic and porcelain get an alkaline pre-spray; stone gets a pH-neutral cleaner instead.
  3. 3
    High-Pressure Clean
    Truck-mounted 200°F water through an enclosed rotary head, with pressure turned down for stone. Cabinets stay dry.
  4. 4
    Extract & Rinse
    Dirty water is extracted the instant it's sprayed, leaving nothing standing on the tile or stone.
  5. 5
    Dry & Prep
    Air movers bring the grout and any stone to the dryness the sealer requires.
  6. 6
    Seal
    Clear sealer, epoxy color seal, or a stone-specific sealer is applied, followed by cure time.
See It For Yourself

Before And After — A Real Customer Kitchen.

Years of buildup came out of this customer's grout in one appointment. Use the slider to compare.

Kitchen tile floor before Lovejoy professional cleaning
Same kitchen tile floor after Lovejoy cleaning — grout restored
Before
After

Real customer kitchen — full grout restoration. Drag the slider left and right.

Older Homes, Renovated Kitchens, And Natural Stone.

In older Wellesley homes, original bathroom tile and small entry floors are common, and decades of scrubbing can leave grout dark and worn. Renovated kitchens and baths often add marble, travertine, or large-format porcelain. Stone is softer and more reactive than ceramic, so it gets lower pressure, pH-neutral products, and a stone-specific sealer.

Larger floors earn a better per-square-foot rate, and for anything over 250 square feet we’ll come out for a free in-person estimate. Natural stone always gets one.

In Wellesley we see everything from 1920s and ’30s baths in Wellesley Farms to newly renovated kitchens in Wellesley Hills and around the Square. Each floor gets a look before we recommend anything, and stone floors always get an in-person estimate first.

Verified Google Reviews

What Customers Say About Our Tile & Grout Cleaning.

★★★★★
"Excellent communication. They were on time and did a fantastic job cleaning carpets and stairs. They also cleaned and sealed natural stone floors and they look new. I highly recommend."
— Bob S., Verified Google Review
★★★★★
“Lovejoy Carpet Care cleaned our family room upholstered furniture as well as the kitchen/mudroom ceramic tile. It looks fantastic and the furniture was almost dry when he finished! Highly recommend!”
— Heather C., Verified Google Review
★★★★★
"Brian has always done a great job for us. We’ve used the deodorizing service, had rugs cleaned and carpet and tile. Highly recommend!"
— Tracy C., Verified Google Review
Questions We Hear In Wellesley

Wellesley Tile & Grout — Common Questions.

Honest answers, including the limits of cleaning.

Do you clean marble and travertine?
Yes, with a stone-specific protocol — lower pressure, pH-neutral cleaners, and the right sealer — because the wrong product can etch stone permanently. Mention “stone” when you call and we’ll schedule an in-person estimate.
Can you make stained grout one even color?
Yes. Epoxy color seal bonds into the grout and covers permanent staining in white, off-white, gray, tan, beige, brown, or a custom match.
Will the cleaning splash on our cabinets?
No. Our cleaning head sprays and vacuums inside a sealed shroud, so nothing reaches cabinets, baseboards, or walls.
When can we use the room again?
Cleaned tile is walkable within an hour. After clear sealer, give it about two hours for foot traffic and a day before water. Color seal needs a day of light use and three days before mopping or heavy wear.
How do we care for it afterward?
Warm water, a microfiber mop, and a pH-neutral cleaner. Avoid vinegar, lemon cleaners, bleach, and ammonia — acidic products are especially hard on marble.
Are estimates free?
Yes. We’ll measure, look at the condition, and give you a written estimate at no charge — required for natural stone and recommended for larger jobs.
What's the quickest way to get a quote for cleaning and sealing?
Send the room sizes through our free estimate form, or call (508) 922-7379. For natural stone, or floors over 250 square feet, we'll come out and look at no charge.

Request An Estimate For Your Wellesley Tile Or Stone.

Free in-person estimates throughout Wellesley — required for natural stone. Call (508) 922-7379.